ADuM1410/ADuM1411/ADuM1412
PACKAGE CHARACTERISTICS
Table 4.
Parameter
Symbol
RI-O
CI-O
CI
θJCI
Min
Typ
1012
2.2
4.0
33
Max
Unit
Ω
pF
pF
°C/W
°C/W
Test Conditions
Resistance (Input-to-Output)1
Capacitance (Input-to-Output)1
Input Capacitance2
f = 1 MHz
IC Junction-to-Case Thermal Resistance, Side 1
IC Junction-to-Case Thermal Resistance, Side 2
Thermocouple located at
center of package underside
θJCO
28
1 The ADuM141x device is considered a 2-terminal device; Pin 1 through Pin 8 are shorted together, and Pin 9 through Pin 16 are shorted together.
2 Input capacitance is from any input data pin to ground.
REGULATORY INFORMATION
The ADuM141x have been approved by the organizations listed in Table 5.
Table 5.
UL1
CSA
VDE2 (ADuM1411 and ADuM1412 pending)
Recognized under 1577
component recognition
program1
Approved under CSA Component
Acceptance Notice #5A
Certified according to DIN EN 60747-5-2
(VDE 0884 Part 2): 2003-012
1 In accordance with UL1577, each ADuM141x is proof tested by applying an insulation test voltage ≥3000 V rms for 1 second (current leakage detection limit = 5 μA).
2 In accordance with DIN EN 60747-5-2, each ADuM141x is proof tested by applying an insulation test voltage ≥1050 V peak for 1 second (partial discharge detection
limit = 5 pC). The * marking branded on the component designates DIN EN 60747-5-2 approval.
INSULATION AND SAFETY-RELATED SPECIFICATIONS
Table 6.
Parameter
Symbol Value
Unit Conditions
Rated Dielectric Insulation Voltage
Minimum External Air Gap (Clearance)
2500
7.7 min
V rms 1 minute duration
L(I01)
L(I02)
mm
Measured from input terminals to output terminals,
shortest distance through air
Minimum External Tracking (Creepage)
8.1 min
mm
Measured from input terminals to output terminals,
shortest distance path along body
Minimum Internal Gap (Internal Clearance)
Tracking Resistance (Comparative Tracking Index)
Isolation Group
0.017 min mm
Insulation distance through insulation
DIN IEC 112/VDE 0303 Part 1
Material Group (DIN VDE 0110, 1/89, Table 1)
CTI
>175
IIIa
V
Rev. E | Page 10 of 20