ACT8933
Rev 3, 15-Nov-12
REG1, REG2, and REG5 remain enabled.
nPBSTAT. Processors should respond by asserting
PWREN, which enables REG3 and REG4 so that
normal operation may resume.
Waking from SLEEP mode is initiated when the
user presses the push-button again, which asserts
Figure 3:
Enable/Disable Sequence
ꢀ
Figure 4:
Sleep Mode Sequence
ꢀ
ꢀ: Applicable only for ACT8933QJ2XX .
Innovative PowerTM
www.active-semi.com
- 30 -
Active-Semi Proprietary―For Authorized Recipients and Customers
ActivePMUTM and ActivePathTM are trademarks of Active-Semi.
I2CTM is a trademark of NXP.
Copyright © 2012 Active-Semi, Inc.
ACTIVE-SEMI [ ACTIVE-SEMI, INC ]
