A Business Partner of Renesas Electronics Corporation.
NE5550279A
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature (package surface temperature) : 260°C or below
IR260
Time at peak temperature
: 10 seconds or less
: 60 seconds or less
: 120±30 seconds
: 3 times
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below
Wave Soldering
Partial Heating
Peak temperature (molten solder temperature)
Time at peak temperature
: 260°C or below
: 10 seconds or less
WS260
HS350
Preheating temperature (package surface temperature)
: 120°C or below
: 1 time
Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below
Maximum number of flow processes
Peak temperature (terminal temperature)
Soldering time (per side of device)
: 350°C or below
: 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2% (Wt.) or below
CAUTION
Do not use different soldering methods together (except for partial heating).
R09DS0033EJ0200 Rev.2.00
Jul 04, 2012
Page 7 of 7