Chapter 3
Assembly, Disassembly
In this chapter, we give the description of how to install/access the
components inside the RC-741.
CAUTION:
Check and make sure that the power supply matches the
environment line voltage in your area before turning on the
system power. Turn off the system power before connection
or disconnecting any peripherals or cables. Electric currents
can cause electric shock or damage to the system.
3.1 Removing the Top Cover
Removal of the top cover allows you to access the internal system
components of the RC-741. When removing the top cover, follow the
instructions listed below.
1. Move your fingertips around the top cover and locate the screws
that attach it to the chassis. A total of six (6) screws should be
removed to free the top cover.
2. There are 2 screws located at the rear side of the chassis, another
2 on the left side and 2 on the right side of the top chassis rim.
Loosen the screws. Secure the screws in a safe place; you will
need them when affixing back the top cover.
3. After removing the six (screws), slide the top cover backwards to
completely disengage it from the chassis. Lift the top cover and
place it aside.
11
BOSER [ BOSER TECHNOLOGY CO., LTD ]
