2.3 Rear Sides
The structure of the RC-741 rear panel is shown on the following figure.
The keyboard connector along the rear panel is a convenient provision
for users wanting to connect a keyboard from the rear or when using
segmented backplane system with the RC-741. See the next section
for more information.
NO.
Description
Power Supply
1
2
3
Extension Slots
PC/AT Keyboard Connector
Power Supply Unit
Each RC-741 can be equipped optionally depending on the power
supply unit with a 250W AT, a 250W ATX, a 300W ATX, or a 400W ATX
power supply.
Extension Interfaces
The SBC external interfaces may very depending on the board, please
see the SBC user’s manual for detail information.
PC/AT Keyboard Connector
If you want to use PC/AT keyboard, please make sure backplane (CN2
or CN3) and SBC’s 5-pin KB connector is connection.
8
BOSER [ BOSER TECHNOLOGY CO., LTD ]
