3.2.4 Installation Disk Drives
The RC-741 has shock-resistant drive bay providing mounting space
for up to one removable shock-resistant drives Drive sizes can be in
eight 3.5” HDD and one 5.25” CD-ROM. 5.25” CD-ROM out of the
installed drives is accessible from the front panel.
1. Examine the disk drive cage and locate the screws attached to it.
2. There are four screws that hold the drive cage from the external
right side of the panel. See the figure on the right for the exact
location of these four screws. Remove these screws then gently
pull the drive cage off the chassis. You may now install the drives
at your preferred locations.
3. Secure the mounting of all the drives before you return the drive
cage back into its original position.
4. Mount back the screws you removed from Steps 2 and 3.
15
BOSER [ BOSER TECHNOLOGY CO., LTD ]
