ADS7863
www.ti.com
SBAS383–JUNE 2007
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric changes could cause the device not to meet its published
specifications.
ORDERING INFORMATION(1)
PACKAGE
DESIGNATOR
TRANSPORT MEDIA,
QUANTITY
PRODUCT
PACKAGE-LEAD
ORDERING NUMBER
ADS7863IDBQ
Tube, 56
SSOP-24
DBQ
RGE
ADS7863IDBQR
ADS7863IRGE
Tape and Reel, 2500
Tape and Reel, 250
Tape and Reel, 3000
ADS7863I
4x4 QFN-24
ADS7863IRGER
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document or see the TI
web site at www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
Over operating free-air temperature range, unless otherwise noted.
ADS7863
–0.3 to +6
UNIT
V
Supply voltage, AVDD to AGND
Supply voltage, BVDD to BGND
–0.3 to +6
V
Supply voltage, BVDD to AVDD
1.5 × AVDD
V
Analog and reference input voltage with respect to AGND
Digital input voltage with respect to BGND
Ground voltage difference |AGND – BGND|
Input current to any pin except supply pins
Operating virtual junction temperature range, TJ
Storage temperature range, TSTG
AGND – 0.3 to AVDD + 0.3
BGND – 0.3 to BVDD + 0.3
+0.3
V
V
V
–10 to +10
mA
°C
°C
°C
–40 to +150
–65 to +150
Lead temperature 1.6mm (1/16in) from case for 10s
+250
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum rated conditions for extended periods may affect device reliability.
2
Submit Documentation Feedback
BB [ BURR-BROWN CORPORATION ]
