6$)(7<#,1)250$7,21
Please read this section BEFORE installing the equipment
,17(1'('#86(56
This Guide is to be made available to all persons who are required to install,
configure, or service equipment described herein or any other associated
operation.
The information given is intended to highlight safety issues, and to enable the
user to obtain maximum benefit from the equipment.
$33/,&$7,21#$5($
The equipment described is intended for industrial motor speed control
applications utilising AC induction or AC synchronous machines.
3(56211(/
Installation, operation and maintenance of the equipment should be carried out
only by qualified personnel. A qualified person is someone who is technically
competent and familiar with all safety information and established safety
practices, with the installation process; operation, and maintenance of this
equipment, and with all the hazards involved.
+$=$5'6
This equipment can endanger life through rotating machinery and high voltages.
The equipment contains high value capacitors which take time to discharge after
removal of the mains supply. Before working on the equipment ensure isolation
of the mains supply from terminals L1, L2/N and L3 (as applicable). Wait for at
least 3 minutes for the capacitors to discharge to safe voltage levels (<50 V)
Failure to do so constitutes AN ELECTRICAL SHOCK HAZARD.
When replacing a drive in an application, and before returning to use, it is
essential that all user defined parameters for the product's operation are
correctly installed.
Failure to do so may create A HAZARD AND RISK OF INJURY.
WARNING! The metal parts may reach 90° C.
$33/,&$7,21#5,6.
The specifications, processes and circuitry described herein are for guidance
only, and may need to be adapted to the user’s specific application.
Eurotherm Drives does not guarantee the suitability of the equipment described
in this Guide for individual applications.
ETC [ ETC ]
