FLEX 10KE
®
Embedded Programmable
Logic Family
Data Sheet
September 2000, ver. 2.10
Features...
s
s
s
Embedded programmable logic devices (PLDs), providing
system-on-a-programmable-chip integration in a single device
–
Enhanced embedded array for implementing megafunctions
such as efficient memory and specialized logic functions
–
Dual-port capability with up to 16-bit width per embedded array
block (EAB)
–
Logic array for general logic functions
High density
– 30,000 to 200,000 typical gates (see
Tables 1
and
2)
– Up to 98,304 RAM bits (4,096 bits per EAB), all of which can be
used without reducing logic capacity
System-level features
–
MultiVolt
TM
I/O pins can drive or be driven by 2.5-V, 3.3-V, or
5.0-V devices
–
Low power consumption
–
Bidirectional I/O performance (t
SU
and
t
CO
) up to 212 MHz
–
Fully compliant with the PCI Special Interest Group (PCI SIG)
PCI Local Bus Specification, Revision 2.2
for 3.3-V operation at
33 MHz or 66 MHz
– -1 speed grade devices are compliant with
PCI Local Bus
Specification, Revision 2.2,
for 5.0-V operation
–
Built-in Joint Test Action Group (JTAG) boundary-scan test
(BST) circuitry compliant with IEEE Std. 1149.1-1990, available
without consuming additional device logic
f
For information on 5.0-V FLEX
®
10K or 3.3-V FLEX 10KA devices, see the
FLEX 10K Embedded Programmable Logic Family Data Sheet.
Table 1. FLEX 10KE Device Features
Feature
Typical gates
(1)
Maximum system gates
Logic elements (LEs)
EABs
Total RAM bits
Maximum user I/O pins
EPF10K30E
30,000
119,000
1,728
6
24,576
220
EPF10K50E
EPF10K50S
50,000
199,000
2,880
10
40,960
254
EPF10K100B
100,000
158,000
4,992
12
24,576
191
Altera Corporation
A-DS-F10KE-02.10
1