Si3035
Data Sheet Changes from Version 1.0
to Version 1.1
! Typical Application Circuit was updated.
! C24, C25 value changed from 470 pF to 1000 pF
and C31, C32 were added in Table 13. The
tolerance was also changed from 20% to 10%.
! Power Supply Voltage, Analog maximum changed
from 4.75 V to 5.00 V in Table 4.
! Last paragraph updated in “Power Management”
text section.
Data Sheet Changes from Version 1.1
to Version 1.2
! TSSOP information added.
! Total supply currents updated in Table 3 and Table 4.
! Cycle time updated in Table 7.
! Delay times updated in Table 8, Table 9, and
Table 10.
! Figure 4 updated.
! Revision G values added in Table 19.
! Figure 16, “Typical Application Schematic,” on page
15 updated.
! Table 13, “Component Values—Typical Application,”
on page 16 (BOM) updated.
Rev. 1.2
53
ETC [ ETC ]
