XC6201 Series
Positive Voltage Regulators
Typical Application
VIN
VOUT
VSS
1.0
µ
F(tantalum or
1.0
µ
F(tantalum or
ceramic)
ceramic)
< External Capacitors>
XC6201 requires an output capacitor between VOUT pin and VSS pin, in order to obtain stable output voltage. The output capacitor should be
greater than 0.1µF except when using low ESR capacitor (e.g. ceramic capacitors) which should be lower than 10µF.
In addition, an input capacitor is required between VIN pin and VSS pin to stabilize the input power supply.
VIN=~10V, VOUT=1.7~6.0V
CIN=1.0uF(ceramic),CL=0.1, 1.0uF(ceramic)
100
10
1
Capacitors
Conditions
greater than 0.1µF
0.1µF ~ 10µF
tantalum capacitor
low ESR capacitor (e.g. ceramic capacitor)
0.1
0.01
0.001
0
50
100
150
200
Measuring Circuits
Load Current IOUT(mA)
Measuring Circuit 1 : Supply Current
Open
VIN
VOUT
A
V
SS
Measuring Circuit 2 : Output Voltage, Oscillation Check, Line Regulation, Dropout Voltage, Load Regulation
VIN
VOUT
µ
1 F
V
V
SS
µ
1 F
3
ETC [ ETC ]
