Le75183
Data Sheet
Parameter
Test Condition
Measure
Min. Typ. Max. Unit
Isolation:
+25 °C
+85 °C
–40 °C
Vswitch (both poles) = ±320 V, Logic inputs = Gnd
Vswitch (both poles) = ±330 V, Logic inputs = Gnd
Vswitch (both poles) = ±310 V, Logic inputs = Gnd
Iswitch
Iswitch
Iswitch
—
—
—
—
—
—
1
1
1
µA
dV/dt Sensitivity†
—
—
—
200
—
V/µs
*Choice of secondary protector and series current-limit resistor should ensure these ratings are not exceeded.
†Applied voltage is 100 Vp-p square wave at 100 Hz. Not tested in production.
Table 6 - Ringing Access Switch, 8
Parameter
Measure
Min. Typ. Max. Unit
Test Condition
OFF-state Leakage Current:
+25°C
ISWITCH
Vswitch (differential) = –320 V to Gnd
Vswitch (differential) = –60 to +260 V
Vswitch (differential) = –330 V to Gnd
Vswitch (differential) = –60 to +270 V
Vswitch (differential) = –310 V to Gnd
Vswitch (differential) = –60 V to +250 V
—
—
1
µA
ISWITCH
ISWITCH
+85°C
–40°C
—
—
—
—
1
1
ON-resistance:
+25 °C
Iswitch (on) = ±5 mA, ±10 mA
Iswitch (on) = ±5 mA, ±10 mA
Iswitch (on) = ±5 mA, ±10 mA
∆ Von
∆ Von
∆ Von
—
—
—
49
—
37
—
77
—
Ω
+85 °C
–40 °C
ON-state Voltage*
DC Current Limit:
+85 °C
Iswitch = ILIMIT @ 50 Hz/60 Hz
VON
—
—
130
V
Vswitch (on) = ±10 V
Vswitch (on) = ±10 V
Iswitch
Iswitch
80
—
—
—
—
mA
–40 °C
250
Break switches in ON state; ringing access
switches OFF; apply ±1000 V at 10/1000 µs
pulse; appropriate secondary protection in place
Dynamic Current Limit
(t = <0.5 µs)
Iswitch
—
2.5
—
A
Isolation:
+25 °C
+85 °C
–40 °C
Vswitch (both poles) = ±320 V, Logic inputs = Gnd
Vswitch (both poles) = ±330 V, Logic inputs = Gnd
Vswitch (both poles) = ±310 V, Logic inputs = Gnd
Iswitch
Iswitch
Iswitch
—
—
—
—
—
—
1
1
1
µA
dV/dt Sensitivity†
—
—
—
200
—
V/µs
*This parameter is not tested in production. Choice of secondary protector should ensure this rating is not exceeded.
†Applied voltage is 100 Vp-p square wave at 100 Hz. Not tested in production.
Table 7 - Loop Access (Test Out) Switches, 9 and 10
14
Zarlink Semiconductor Inc.
ZARLINK [ ZARLINK SEMICONDUCTOR INC ]
