Le75181
ABSOLUTE MAXIMUM RATINGS
Data Sheet
Stresses above those listed under
Absolute Maximum Ratings
may cause permanent device failure. Functionality at or above
these limits is not implied. Exposure to absolute maximum ratings for extended periods may affect device reliability.
Parameter
Operating Temperature Range
Storage Temperature Range
Relative Humidity Range
Pin Soldering Temperature (t=10 s max)
5-V Power Supply
Battery Supply
Logic Input Voltage
Input-to-output Isolation
Pole-to-pole Isolation (All except SW 4)
Pole-to-pole Isolation (Ringing Access Switch, SW4)
ESD Immunity (Human Body Model)
Min
–40
Max
110
Unit
°C
–40
150
°C
5
95
%
—
260
°C
-0.3
7
V
—
–85
V
-0.3
V
DD
+0.3
V
—
330
V
—
330
V
—
480
V
JESD22 Class 1C compliant
Package Assembly
Green package devices are assembled with enhanced, environmental compatible lead-free, halogen-free, and antimony-free
materials. The leads possess a matte-tin plating which is compatible with conventional board assembly processes or newer lead-
free board assembly processes. The peak soldering temperature should not exceed 245°C during printed circuit board assembly.
Refer to IPC/JEDEC J-Std-020B Table 5-2 for the recommended solder reflow temperature profile.
OPERATING RANGES
Environmental Ranges
Zarlink
guarantees the performance of this device over commercial (0 to 70º C) and industrial (-40 to 85ºC) temperature ranges
by conducting electrical characterization over each range and by conducting a production test with single insertion coupled to
periodic sampling. These characterization and test procedures comply with section 4.6.2 of Bellcore GR-357-CORE Component
Reliability Assurance Requirements for Telecommunications Equipment.
Ambient Temperature
−40°
to 85°C
Electrical Ranges
Supply
V
DD
V
BAT
*
Min
4.5
–19
Typ
5
—
Max
5.5
–72
Unit
V
*V
BAT
is used only as a reference for internal protection circuitry. If V
BAT
rises above –10 V, the device will enter an all OFF state and remain in
this state until the battery voltage drops below –15 V.
5
Zarlink Semiconductor Inc.