YB1518
Step-up DC-DC Converter White LED Driver
Pin Configuration
Figure 2: YB1518 Pin Configuration
Pin Description
Table 1
Pin
1
2
NAME
Description
SW
GND
Switching Pin. This is the collector of the internal NPN power
switch. Connect to inductor and diode. Minimize the metal
trace area connected to this pin to reduce EMI.
Ground Pin. Connect directly to local ground plane.
Feedback Pin. Reference voltage is 100mV. Connect LEDs
and a resistor at this pin. LED current is determined by the
resistance and CTRL voltage.
Shutdown Pin and Dimming Control pin.
VCTRL > 1.8V generates full-scale LED current
VCTRL < 0.4V chip is off
Switching from 0.4V to 2.0V, PWM duty cycle controls the LED
current
Input Supply Pin. Bypass this pin with a capacitor as close to
the device as possible
3
FB
4
CTRL
5
VIN
Ordering Information
Table 2
Order Number
YB1518ST25
Supplied as
3000 units Tape & Reel
Package Marking
Y58M
YB1518 MRev.1.2
www.yobon.com.tw
2