AC-DC Power Supplies
CCL400 Series
Signals & Controls
Characteristic
Notes & Conditions
Uncomitted opto isolated transistor, normally off when AC is good (see fig.5)
Provides 5 - 15ms warning of loss of output from AC failure off when AC is healthy.
Uncommited isolated optocoupler diode, powered diode inhibits the supply (see fig.6 & 7)
5V/0.5A Isolated supply present when AC applied.
Power Fail (AC-OK)
Inhibit
Standby Supply
Remote Sense
Compensates for 0.25V per lead, 0.5V total drop.
Power Fail
Inhibit (High)
Inhibit (Low)
Figure 7
Figure 5
Figure 6
5 V
5 V
POWER SUPPLY
8V Max 3 mA
POWER SUPPLY
POWER SUPPLY
Pin 6 CON 4
Power Fail
Collector
1K
5 mA 8 V Max
1K
Inhibit Hi
8 V Max
Pin 8 CON 4
Inhibit Hi
Pin 8
Transistor On: Input & Output Not OK
Transistor Off: Input & Output OK
CON 4
Power Fail
Emitter
Pin 5 CON 4
Inhibit Lo
Inhibit Lo
5 mA
Pin 3 CON 4
Pin 3 CON 4
VI RTN
VI RTN
Signal Connector
Pin 7 CON 4
Pin 7 CON 4
Signal Connector
Signal Connector
Environmental
Characteristic
Minimum
-40
Typical
Maximum
+70
Units
°C
Notes & Conditions
See derating curve, fig.8. and Thermal
Operating Temperature
Storage Temperature
Cooling
Considerations on page 8.
-40
+85
°C
Convection or conduction-cooled with 0.5 °C/W or
better heatsink
Humidity
Operating Altitude
Shock
95
5000
%RH
m
Non-condensing
3 x 30g shocks in each plane, total 18 shocks. 30g = 11ms ( 0.5msec), half sine. Conforms to EN60068-2-27 & EN60068-2-47
Single axis 10 - 500 Hz at 2g sweep and endurance at resonance in all 3 planes. Conforms to EN60068-2-6
Vibration
Temperature Derating Curve
400
300
200
Conduction-cooled
≥ 90 - 264 VAC
Figure 8 - No Cover Fitted
Convection-cooled 100 - 264 VAC
&
Conduction-cooled 90 - 264 VAC
176 W
100
0
-40 -30 -20 -10
0
10 20 30 40 50 60 70
Ambient Temperature (°C)
Figure 9 - Cover Fitted
400
Conduction-cooled 90 - 264 VAC
Convection-cooled 90 - 264 VAC
322
300
201 W
161 W
200
100
0
-40 -30 -20 -10
0
10 20 30 40 50 60 70
Ambient Temperature (°C)
www.xppower.com
4
XPPOWER [ XP POWER LIMITED ]
