STANDARD MICROCIRCUIT DRAWING SOURCE APPROVAL BULLETIN - continued.
Standard
microcircuit drawing
PIN 1/
Vendor
CAGE
Vendor
similar
number
1FN41
PIN 2/
5962-8863403ZA
AT28HC256-90FM/883
3/
34371
3/
FM28HC256-90
5962-8863403ZC
5962-8863404UA
5962-8863404XA
5962-8863404YA
5962-8863404ZA
5962-8863405UA
5962-8863405XA
5962-8863405YA
5962-8863405ZA
28HC256
X28HC256FMB-90
AT28HC256F-90UM/883
TM28HC256-90
1FN41
3/
1FN41
3/
AT28HC256F-90DM/883
DM28HC256-90
1FN41
3/
AT28HC256F-90LM/883
LM28HC256-90
1FN41
3/
AT28HC256F-90FM/883
FM28HC256-90
1FN41
3/
AT28HC256-70UM/883
TM28HC256-70
1FN41
3/
AT28HC256-70DM/883
DM28HC256-70
1FN41
3/
AT28HC256-70LM/883
LM28HC256-70
1FN41
3/
AT28HC256-70FM/883
FM28HC256-70
1/ The lead finish shown for each PIN representing a hermetic package
is the most readily available from the manufacturer listed for that part.
If the desired lead finish is not listed contact the vendor to determine
its availability.
2/ Caution. Do not use this number for item acquisition. Items acquired to
this number may not satisfy the performance requirements of this drawing.
3/ No longer available from an approved source.
Vendor CAGE
number
Vendor name
and address
1FN41
ATMEL Corporation
2325 Orchard Parkway
San Jose, CA 95131 - 1034
34371
Intersil Corporation
1001 Murphy Ranch Road
Milpitas, CA 95035 - 5680
The information contained herein is disseminated for convenience only and
the Government assumes no liability whatsoever for any inaccuracies in this
information bulletin.
2 of 2
XICOR [ XICOR INC. ]
