WPMIx9200501S / 1779205x4
MagI3C Power Module
FISM – Fixed Isolated SIP Module
NOTES
(1) Min and Max limits are 100% production tested at 25°C. Limits over the operating temperature range are guaranteed
through correlation using Statistical Quality Control (SQC) methods.
(2) Test voltage as defined by the UL60950-1
(3) Typical values are valid at 25°C ambient temperature and represent statistically the utmost probability assuming the
Gaussian distribution.
(4) Depending on temperature, see safe operating area diagram (SOA)
(5) Measured without heatsink, no air flow
(6) Overload current, see overload behavior diagram
(7) The module output is not current limited or short circuit protected. Continuous operation above the specified values will
damage the device.
(8) Within the complete VIN tolerance range
(9) MIL-HDBK-217F; GB Ground, Benign: Non mobile, temperature and humidity controlled environments readily
accessible to maintenance; includes laboratory instruments and test equipment, medical electronic equipment,
business and scientific computer complexes, and missiles and support equipment in ground silos; MTBF value is
referring to 177920514
we-online.com
©July 2016
Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 1.0
6/21
WURTH [ WURTH ELEKTRONIK GMBH & CO. KG, GERMANY. ]
