WM8762
Production Data
REVISION HISTORY
DATE
REV
ORIGINATOR
CHANGES
23/12/03
4.0
JMacD
Updated to Production Data
Order codes: leadfree and T&R options added, peak soldering temp added p3
Pin Configuration: Pin 8 changed to VOUTR and Pin 5 changed to VOUTL, p3
Pin Description: changes as above, p3
29//09/04
4.1
JC
Recommended External Component Diagram, changes as above, p12
Order Codes – removed leaded codes, p3
25/07/06
21/04/08
4.2
4.3
JMacD
ID
Important Notice updated, p15
Added DAC phase invertion comment – P9
Added POR description and changed POR threshold from 1.8V to 2.4V. to be consistent
with other devices.
Removed “WIDE BODY” from package information.
Minimum Temp updated from -25 to -40oC, p2, p4
04/11/08
28/06/11
4.4
4.5
JMacD
BT
Added 192fs and 384fs recommended operating conditions to avoid unspecified
operation in Audio Data Sampling Rates section, p10 and p11.
26/09/11
26/09/11
4.6
4.6
JMacD
JMacD
Order codes changed from WM8762GED/V and WM8762GED/RV to WM8762CGED
and WM8762CGED/R to reflect change to copper wire bonding.
MSL changed from MSL2 to MSL1.
PD, Rev 4.6, November 2011
17
w