WM8750-EV1M
LINKS AND
JUMPERS
LINK/JUMPER STATUS
DESCRIPTION
H1
H2
All jumpers in place.
No jumpers in place.
Pins 2 and 3 SHORT
SHORT
DAC clocks and data input
ADC clocks and data output
Connects to GND for HP output reference
Slave mode
SW36
J18 (BCLK)
J20 (ADCLRC)
J25 (DACLRC)
J23
SHORT
Slave mode
SHORT
Slave mode
SHORT
Slave mode
J32 and J33
J34 and J35
SW3
OPEN
OUT signals are AC coupled
OUT signals are DC coupled
SHORT
1
1
2
0
3
0
4
1
5
0
6
0
DATA FORMAT
I2S Compatible
SW4
Pins 1 and 2 SHORT
Pins 2 and 3 SHORT
Pins 2 and 3 SHORT
Pins 2 and 3 SHORT
Pins 2 and 3 SHORT
3-wire (SPI) Control Mode
SW1, SW2
SW5, SW7
SW8, SW9
SW27, SW28
Line Input Select (Phono Socket)
Line Input Select (Phono Socket)
Line Input Select (Phono Socket)
Line Output Select (Phono Socket)
Table 15 DAC to Mono Speaker Setup Jumper Settings (Slave Mode)
SOFTWARE SETUP
1. Press the ‘DAC Setup’ button.
2. Open the Mixer Control panel. Set the ‘ROUT2 Invert’ switch to Signal Inverted
followed by the ‘Mixer Submit’ button.
Rev 2.0, February 2005
45
w