WM8750-EV1M
SERIAL INTERFACE SOFTWARE DESCRIPTION
The following section will detail the downloading and installation of evaluation software and
also the operation of the software and the functionality of each control button.
SOFTWARE DOWNLOAD
The current evaluation board control software WM8750-EV1S should be downloaded from
the Wolfson website [www.wolfsonmicro.com].
From the homepage it is recommended to carry out a search for ‘WM8750’ and select the
evaluation board ’more’ button. Select ‘download’ from the top right hand corner under the
software label. Once the licence agreement has been accepted, select the
WM8750_EV1S_REVx.x.ZIP link and download to your hard drive.
SOFTWARE INSTALLATION
Once the .zip file has been downloaded, to install the software:
•
•
•
Open the .zip file.
Double click on the setup.exe file.
Follow the on-screen installation instructions and save to the desired location.
The software can then be opened by either running the extracted WM8750_EV1_REVx.x.exe
file from the saved location or alternatively, selecting: Start > Programs > WM8750-EV1S-
REVx.x > WM8750-EV1S.
SOFTWARE OPERATION
Due to the many features offered by the WM8750, the software has been split into five
different panels. This eases the complexity of the software making each panel less busy, the
panels have also been grouped so that it makes it simple to control each section of the
device.
The main menu panel shown in Figure 4 is used to call up the other panels as well as
offering a number of pull-down menus.
Figure 4 Software Menu Panel
Rev 2.0, February 2005
13
w