Production Data
WM8741
SAMPLING
RATE
MASTER CLOCK (MCLK) FREQUENCY (MHZ)
128fs
192fs
256fs
384fs
512fs
768fs
(LRCLK)
32kHz
Unavailable
Unavailable
Unavailable
11.2896
Unavailable
Unavailable
Unavailable
16.9344
8.192
11.2896
12.288
22.5792
24.576
12.288
16.9344
18.432
33.8688
36.864
16.384
22.5792
24.576
24.576
33.8688
36.864
44.1kHz
48kHz
88.2kHz
96kHz
Unavailable Unavailable
Unavailable Unavailable
12.288
18.432
176.4kHz
192kHz
22.5792
33.8688
Unavailable Unavailable Unavailable Unavailable
Unavailable Unavailable Unavailable Unavailable
24.576
36.864
Table 11 Typical Relationships between Master Clock Frequency and Sampling Rate in Normal
PCM Mode
8FS MODE
Operation in 8FS mode requires that audio data for left and right channels is input separately on two
pins. DINR (pin 4) is the input for right channel data and DINL (pin 2) is the input for left channel
data. Hardware control of the device is not available.
The data can be input in two formats (left or right justified), selectable by register FMT[1:0], and two
word lengths (20 or 24 bit), selectable by register IWL[1:0]. In both modes the data is clocked into
the WM8741 MSB first.
For left justified data the word start is identified by the falling edge of LRCLK. The data is clocked in
on the next 20/24 BCLK rising edges. This format is compatible with industry-standard DSPs and
decoders such as the PMD100.
Figure 19 8FS Mode Left Justified Timing Requirements
For right justified mode, the data is justified to the rising edge of LRCLK and the data is clocked in on
the preceding 20/24 BCLK rising edges before the LRCLK rising edge. This format is compatible
with industry standard DSPs and decoders such as the DF1704 or SM5842.
Figure 20 8FS Mode Right Justified Timing Requirements
PD, Rev 4.2, October 2009
w
25