w
DESCRIPTION
The WM8533 is a stereo DAC with integral charge pump and
software control interface. This provides 2Vrms line driver
outputs using a 3.3V power supply rail.
The device features ground-referenced outputs and the use
of a DC servo to eliminate the need for line driving coupling
capacitors and effectively eliminate power on pops and
clicks.
The device is controlled and configured either via the
I2C/SPI compliant serial control interface or a hardware
control interface.
The device supports all common audio sampling rates
between 8kHz and 192kHz using all common MCLK / fs
ratios. Master and slave modes are available and de-
emphasis is also supported.
The WM8533 has a 1.8 to 3.3V tolerant digital interface,
allowing logic up to 3.3V to be connected.
The device is available in a 1.842 x 1.772mm 20-ball WCSP.
WM8533
24-bit 192kHz Stereo DAC with 2Vrms Ground Referenced Line Output
FEATURES
High performance stereo DAC with ground referenced line
driver
Audio performance
106dB SNR (‘A-weighted’)
-89dB THD @ -1dBFS
Digital volume control ranging from -100dB to +12dB
120dB mute attenuation
All common sample rates from 8kHz to 192kHz supported
2
I C/SPI compatible and hardware control modes
2
Data formats: LJ, RJ, I S, DSP
De-emphasis supported
Maximum 1mV DC offset on line outputs
Pop/click suppressed power up/down sequencer
AVDD and LINEVDD +3.3V ±10% allowing single supply
DBVDD supply supports +1.8V or +3.3V digital I/O
1.842 x 1.772mm 20-ball WCSP
APPLICATIONS
Consumer digital audio applications requiring 2Vrms output
Set Top Box
Digital TV
DVD Players
Games Consoles
A/V Receivers
BLOCK DIAGRAM
CONTROL
INTERFACE
W
WM8533
LEFT
DAC
MCLK
BCLK
LRCLK
DACDAT
DIGITAL
AUDIO
INTERFACE
DIGITAL
FILTERS
RIGHT
DAC
LINEOUTL
LINEREF
LINEOUTR
CHARGE PUMP
WOLFSON MICROELECTRONICS plc
To receive regular email updates, sign up
at
http://www.wolfsonmicro.com/enews
Production Data, July 2012, Rev 4.0
Copyright
2012
Wolfson Microelectronics plc