W83697HF/F
CRE7 (Default 0x00)
Bit 7 - 3 : Reserved.
Bit 2
:Reset CIR Power-On function. After using CIR power-on, the software should write logical 1
to restart CIR power-on function.
Bit 1
: Invert RX Data.
= 1 Inverting RX Data.
= 0 Not inverting RX Data.
: Enable Demodulation.
Bit 0
= 1 Enable received signal to demodulate.
= 0 Disable received signal to demodulate.
CRF0 (Default 0x00)
Bit 7
Bit 6
Bit 5
: CHIPPME. Chip level auto power management enable.
= 0 disable the auto power management functions
= 1 enable the auto power management functions.
: CIRPME. Consumer IR port auto power management enable.
= 0 disable the auto power management functions
= 1 enable the auto power management functions.
: MIDIPME. MIDI port auto power management enable.
= 0 disable the auto power management functions
= 1 enable the auto power management functions.
: Reserved. Return zero when read.
Bit 4
Bit 3
: PRTPME. Printer port auto power management enable.
= 0 disable the auto power management functions.
= 1 enable the auto power management functions
: FDCPME. FDC auto power management enable.
= 0 disable the auto power management functions.
= 1 enable the auto power management functions.
: URAPME. UART A auto power management enable.
= 0 disable the auto power management functions.
= 1 enable the auto power management functions.
: URBPME. UART B auto power management enable.
= 0 disable the auto power management functions.
= 1 enable the auto power management functions.
Bit 2
Bit 1
Bit 0
Publication Release Date: Feb. 2002
Revision 0.70
- 153 -
WINBOND [ WINBOND ]
