W83627HF/ F/ HG/ G
Bit 7： A one indicates the fan count limit of FAN2 has been exceeded.
Bit 6： A one indicates the fan count limit of FAN1 has been exceeded.
Bit 5： A one indicates a High limit of VTIN2 has been exceeded from temperature sensor 2.
Bit 4： A one indicates a High limit of VTIN1 has been exceeded from temperature sensor 1.
Bit 3： A one indicates a High or Low limit of +5VIN has been exceeded.
Bit 2： A one indicates a High or Low limit of +3.3VIN has been exceeded.
Bit 1： A one indicates a High or Low limit of VCOREB has been exceeded.
Bit 0： A one indicates a High or Low limit of VCOREA has been exceeded.
Interrupt Status Register 2 - Index 42h
Register Location：
Power on Default Value：
Attribute：
42h
00h
Read Only
8 bits
Size：
7
6
5
4
3
2
1
0
+12VIN
-12VIN
-5VIN
FAN3
Chassis Intrusion
Temp3
Reserved
Reserved
Bit 7-6： Reserved.This bit should be set to 0.
Bit 5： A “1” indicates a High limit of VTIN3 has been exceeded from temperature sensor 3.
Bit 4： A “1” indicates Chassis Intrusion Event Occur. When CASEOPEN#（Pin 76）gone logic low,
this bit will be set “1”.
Bit 3： A “1” indicates the fan count limit of FAN3 has been exceeded.
Bit 2： A “1” indicates a High or Low limit of -5VIN has been exceeded.
Bit 1： A “1” indicates a High or Low limit of -12VIN has been exceeded.
Bit 0： A “1” indicates a High or Low limit of +12VIN has been exceeded.
- 46 -
WINBOND [ WINBOND ]
