W83627HF/ F/ HG/ G
Configuration Register - Index 40h
Register Location：
Power on Default Value：
Attribute：
40h
01h
Read/write
8 bits
Size：
7
6
5
4
3
2
1
0
START
SMI#Enable
RESERVED
INT_Clear
RESERVED
RESERVED
RESERVED
INITIALIZATION
Bit 7： A one restores power on default value to all registers except the Serial Bus Address register.
This bit clears itself since the power on default is zero.
Bit 6： Reserced
Bit 5： Reserved
Bit 4： Reserved
Bit 3： A one disables the SMI# output without affecting the contents of Interrupt Status Registers.
The device will stop monitoring. It will resume upon clearing of this bit.
Bit 2： Reserved
Bit 1： A one enables the SMI# Interrupt output.
Bit 0： A one enables startup of monitoring operations, a zero puts the part in standby mode.
Note： The outputs of Interrupt pins will not be cleared if the user writes a zero to this location after an interrupt has occurred
unlike "INT_Clear'' bit.
Interrupt Status Register 1 - Index 41h
Register Location：
Power on Default Value：
Attribute：
41h
00h
Read Only
8 bits
Size：
7
6
5
4
3
2
1
0
VCOREA
VCOREB
+3.3VIN
+5VIN
TEMP1
TEMP2
FAN1
FAN2
Publication Release Date: June 09, 2006
Revision 2.27
- 45 -
WINBOND [ WINBOND ]
