1.3 Absolute maximum ratings. 4/
Supply voltage range (V
CC
)........................................................
Signal voltage range (V
g
)...........................................................
Power dissipation (P
D
):
Device types 01-04 and 17-20...................................................
Device types 05, 06, 11, and 12 ................................................
Device types 07, 08, 13, and 14 ................................................
Device types 09, 10, 15, and 16 ................................................
Thermal resistance, junction-to-case (θ
JC
):
Case outline A and M............................................................
Case outlines T, U, and X ......................................................
Case outline Y........................................................................
Case outlines B and 9............................................................
Storage temperature range .......................................................
Lead temperature (soldering, 10 seconds)................................
Junction temperature (T
J
) ..........................................................
1.4 Recommended operating conditions.
Supply voltage range (V
CC
)........................................................
Input low voltage range (V
IL
)......................................................
Input high voltage range (V
IH
)....................................................
Output low voltage, maximum (V
OL
) ..........................................
Output high voltage, minimum (V
OH
) .........................................
Ambient operating temperature range (T
A
)................................
2. APPLICABLE DOCUMENTS
2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a
part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in
the solicitation or contract.
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-38534 - Hybrid Microcircuits, General Specification for.
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-883 - Test Method Standard Microcircuits.
MIL-STD-1835 - Interface Standard for Electronic Component Case Outlines.
DEPARTMENT OF DEFENSE HANDBOOKS
MIL-HDBK-103 - List of Standard Microcircuit Drawings.
MIL-HDBK-780 - Standard Microcircuit Drawings.
(Copies of these documents are available online at
http://assist.daps.dla.mil/quicksearch/
or
www.dodssp.daps.mil
or from
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
+4.5 V dc to +5.5 V dc
-0.3 V dc to +0.8 V dc
+2.2 V dc to V
CC
+0.3 V dc
+0.4 V dc
+2.4 V dc
-55°C to +125°C
-0.5 V dc to +7.0 V dc
-0.5 V dc to V
CC
+0.5 V dc
2.2 W
3.2 W
3.6 W
4.4 W
9.27°C/W
4.160°C/W
5.251°C/W
1.495°C/W
-65°C to +150°C
+300°C
+150°C
4/
Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43216-5000
SIZE
A
REVISION LEVEL
R
5962-94611
SHEET
4
DSCC FORM 2234
APR 97