VSC8601 Datasheet
Product Overview
2
Product Overview
The VSC8601 device is a low-power Gigabit Ethernet (GbE) transceiver ideal for Gigabit
LAN-on-Motherboard applications. The device’s compact, plastic low-profile quad flat
package (LQFP) with an exposed pad is optimal for footprint-sensitive applications.
Vitesse’s mixed signal and digital signal processing (DSP) architecture assures robust
performance. It supports both half-duplex and full-duplex 10BASE-T, 100BASE-TX, and
1000BASE-T communication speeds over Category 5 (Cat5) unshielded twisted pair
(UTP) cable at distances greater than 140 m, displaying excellent tolerance to NEXT,
FEXT, echo, and other types of ambient environment and system electronic noise.
The following illustration shows a high-level, generic view of a VSC8601 application.
Figure 1.
Typical Application
3.3 V
RGMII
10/100/1000BASE-T MAC,
VSC8601
RJ45+Magnetics
Switching ASIC,
10/100/1000BASE-T
or Network Processor
Transceiver
25 MHz
Management I/F (MDC / MDIO)
2.1
Features
This section lists key aspects of the VSC8601 device functionality and design that
distinguish it from similar products:
•
•
•
•
•
•
•
10/100/1000BASE-T PHY with industry’s lowest power consumption.
Compliant with IEEE 802.3 (10BASE-T, 100BASE-TX, 1000BASE-T) specifications.
Supports RGMII versions 1.3 and 2.0 (2.5 V, 3.3 V) MAC interface.
Low EMI line driver with integrated line side termination resistors.
Up to 16 kB jumbo frame support in all speeds.
Three programmable direct drive LEDs.
Suite of test modes, including loopback paths, Ethernet packet generators, and CRC
counters.
•
The VeriPHY® suite provides extensive network cable information such as cable
length, termination status, and open/short fault location.
•
•
ActiPHYTM power saving modes.
Advanced power management complies with Wake-on-LANTM and PCI2.2 power
requirements.
Revision 4.1
September 2009
Page 14