BCM4414xH0E5035yzz
Application Characteristics (Cont.)
Temperature controlled via pin-side cold plate, unless otherwise noted. All data presented in this section are collected from units processing power in the
forward direction (high-voltage side to low-voltage side). See associated figures for general trend data.
Figure 14 — Full-load LO-side voltage ripple, no external CHI_IN_EXT
;
Figure 15 — 0 – 35A transient response: no external CHI_IN_EXT,
no external CLO_OUT_EXT Board-mounted module,
scope setting: 20MHz analog BW
no external CLO_OUT_EXT
.
Figure 16 — 35 – 0A transient response: no external CHI_IN_EXT
,
Figure 17 — Start up from application of VHI_DC = 650V, 20% ILO_DC,
no external CLO_OUT_EXT
100% CLO_OUT_EXT
Figure 18 — Start up from application of OPERATION COMMAND
with pre-applied VHI_DC = 650V, 20% ILO_DC
,
100% CLO_OUT_EXT
BCM® in a VIA™ Package
Page 16 of 43
Rev 1.0
04/2019
VICOR [ VICOR CORPORATION ]
