UNIVERSAL INPUT
TFC130 SERIES
OUTPUT VOLTAGE/CURRENT RATING CHART
(1)(2)
(5)(6)
Product No.
V1(3)
5CFM 10CFM
V2
V3 (4)
5CFM 10CFM
Vnom. Imax.Imax.Tol. Vnom.
V4 (4)
5CFM 10CFM
Imax.Imax. Tol. Vnom. Imax.Imax. Tol.
VO
5CFM 10CFM
5CFM 10CFM
Vnom.Imax.Imax. Tol. Vnom. Imax. Imax. Tol.
(N/A)
2% +12V 3.25A
TFC130-D23-3 +5.1V 8A 12A 2%
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
+3.3V 8A 12A
(N/A)
2%
TFC130-D23
TFC130-D24
TFC130-D25
TFC130-T31
TFC130-T32
TFC130-T33
TFC130-T34
TFC130-T35
TFC130-T36
TFC130-T31-3
TFC130-T33-3
TFC130-T39-3
TFC130-Q41
TFC130-Q42
TFC130-Q43
TFC130-Q41-3
TFC130-Q42-3
TFC130-Q43-3
TFC130-Q44-3
TFC130-Q45-3
TFC130-Q46-3
TFC130-F51-3
TFC130-F52-3
6A 3%
2% +15V 2.6A 4.8A 3%
(N/A)
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
+5.1V 8A 12A
(N/A)
(N/A)
2% +24V 1.63A
2% +12V 3.25A
3A 3%
(N/A)
(N/A)
6A 3% +5V~+24V 0.5A 1A 2%
(N/A)
(N/A)
2% +15V 2.6A 4.8A 3% +5V~+24V 0.5A 1A 2%
(N/A)
(N/A)
2% +24V 1.63A
2% +12V 3.25A
3A 3% +5V~+24V 0.5A 1A 2%
(N/A)
–5V~–24V 0.5A 1A 2%
–5V~–24V 0.5A 1A 2%
–5V~–24V 0.5A 1A 2%
(N/A)
(N/A)
6A 3%
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)
2% +15V 2.6A 4.8A 3%
(N/A)
2% +24V 1.63A
2% +12V 3.25A
3A 3%
6A 3%
(N/A)
+3.3V 8A 12A
+3.3V 8A 12A
+3.3V 8A 12A
(N/A)
2%
2%
2%
2% +15V 2.6A 4.8A 3%
(N/A)
2% +24V 1.63A
2% +12V 3.25A
3A 3%
(N/A)
6A 3% +5V~+24V 0.5A 1A 2% –5V~–24V 0.5A 1A 2%
2% +15V 2.6A 4.8A 3% +5V~+24V 0.5A 1A 2% –5V~–24V 0.5A 1A 2%
(N/A)
2% +24V 1.63A
2% +12V 3.25A
3A 3% +5V~+24V 0.5A 1A 2% –5V~–24V 0.5A 1A 2%
(N/A)
6A 3% +5V~+24V 0.5A 1A 2%
(N/A)
(N/A)
(N/A)
+3.3V 8A 12A
+3.3V 8A 12A
+3.3V 8A 12A
2%
2%
2%
2%
2%
2%
2%
2%
2%
2% +15V 2.6A 4.8A 3% +5V~+24V 0.5A 1A 2%
2% +24V 1.63A
2% +12V 3.25A
3A 3% +5V~+24V 0.5A 1A 2%
6A 3%
(N/A)
(N/A)
(N/A)
–5V~–24V 0.5A 1A 2% +3.3V 8A 12A
–5V~–24V 0.5A 1A 2% +3.3V 8A 12A
–5V~–24V 0.5A 1A 2% +3.3V 8A 12A
2% +15V 2.6A 4.8A 3%
2% +24V 1.63A
2% +12V 3.25A
3A 3%
6A 3% +5V~+24V 0.5A 1A 2% –5V~–24V 0.5A 1A 2% +3.3V 8A 12A
2% +15V 2.6A 4.8A 3% +5V~+24V 0.5A 1A 2% –5V~–24V 0.5A 1A 2% +3.3V 8A 12A
TFC130-F53-3 +5.1V 8A 12A 2% +24V 1.63A 3A 3% +5V~+24V 0.5A 1A 2% –5V~–24V 0.5A 1A 2% +3.3V 8A 12A
NOTES:
1. The outputs of each model are from two independent channels. Channel
#1 consists of the main output V1 and auxiliary output V0. Channel #2
consists of the main output V2 and auxiliary outputs V3 and V4. The
maximum output power that may be drawn from each channel is 45W
with 5 CFM forced-air cooling or 65W with 10 CFM forced-air cooling.
The derating curve on right provides guidelines on application within the
specified operating temperature range.
2. “5 CFM Imax.” (“10 CFM Imax.”) is the maximum current of individual
output when 5 CFM (10 CFM) forced air is provided. Under a specific
cooling condition, both the maximum output power stated in note #1 and
the maximum current of individual output must not be exceeded.
3. V1 needs a minimum current of 0.8A to support output V0 at its maximum
rated load.
4. The total output power of V3 and V4 should not exceed 30W. V3 is adjustable between +5V and +24V, and set at +12V as standard.
V4 is adjustable between –5V and –24V, and set at –12V as standard. It is welcome to consult factory for the two outputs to be set
at wanted voltages within the adjustable ranges.
5. Ripple and noise measured peak to peak across a 20MHz bandwidth by using a 12 inch twisted pair terminated with a 10µF
tantalum capacitor in parallel with a 0.1µF ceramic capacitor.
6. “Tol.” Is output voltage tolerance which includes initial set-up error, thermal drift, line regulation, load regulation and cross
regulation.
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: sales@trumpower.com ● Website: www.TRUMPower.com