TGA4823-2-SM
Table I
Absolute Maximum Ratings 1/
Symbol
Vd-Vg
Vd
Parameter
Value
Notes
Drain to Gate Voltage
12 V
9 V
Drain Voltage
2/
2/
2/
2/
Vg
Gate Voltage Range
Control Voltage Range
Drain Current
-5 to 0 V
Vctrl
Id
-1 to +2 V
400 mA
Ig
Gate Current Range
Control Current Range
Input Continuous Wave Power
Channel Temperature
-1.8 to 18.9 mA
-1.8 to 18.9 mA
27.8 dBm
200 °C
Ictrl
Pin
Tchannel
2/
1/
These ratings represent the maximum operable values for this device. Stresses beyond those listed
under “Absolute Maximum Ratings” may cause permanent damage to the device and / or affect
device lifetime. These are stress ratings only, and functional operation of the device at these
conditions is not implied.
2/
Combinations of supply voltage, supply current, input power, and output power shall not exceed the
maximum power dissipation listed in Table IV.
Table II
Recommended Linear Operating Conditions
Symbol
Parameter 1/
Value
Vd
Drain Voltage
Drain Current
8 V
Id
310 mA
350 mA
-0.3 V
1 V
Id_Drive
Vg
Drain Current under RF Drive
Typical Gate Voltage
Control Voltage
Vctrl
1/
See assembly diagram for bias instructions.
2
TriQuint Semiconductor: www. triquint.com (972)994-8465 Fax (972)994-8504 Info-mmw@tqs.com
May 2012 © Rev C
TRIQUINT [ TRIQUINT SEMICONDUCTOR ]
