TMCM-1070 Hardware Manual • Hardware Version V1.00 | Document Revision V1.00 • 2016-Sept-16
17 / 23
TTL UART high level voltage
TTL UART output voltage
VT T L
3.25
5
V
V
H
VT T L_OUT
5
Table 10: Operational ratings of optically isolated inputs and TTL UART interface
6.4 Functional Characteristics
Parameter
Control
Description / Value
4-wire interface with Step, Direction, Enable, and Chopper Mode Switch
Step Pulse Width
The step pulse width should be between 2µs and 4µs for maximum frequency.
With a larger step pulse width, for example 50% duty cycle coming from a
frequency generator, the maximum input frequency will be lower at ca. 9kHz.
Communication
Driving Mode
2-wire TTL UART interface for configuration, 9600-115200 bps (default 57600
bps)
spreadCycle and stealthChop chopper modes (selectable with CHOP input),
adaptive automatic current reduction using stallGuard2 and coolStep
Stepping Resolution Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 step, default is 1/16 with internal
interpolation to 1/256
Table 11: Functional Characteristics
6.5 Other Requirements
Specifications
Description or Value
Free air
Cooling
Working environment Avoid dust, water, oil mist and corrosive gases, no condensation, no frosting
Working temperature -30° C to +40° C
Table 12: Other Requirements and Characteristics
©2016 TRINAMIC Motion Control GmbH & Co. KG, Hamburg, Germany
Terms of delivery and rights to technical change reserved.
Download newest version at www.trinamic.com
Read entire documentation.