SLES209E
–
NOVEMBER 2007
–
REVISED OCTOBER 2011
The TVP5150AM1 decoder converts baseband analog video into digital YCbCr 4:2:2 component video.
Composite and S-video inputs are supported. The TVP5150AM1 decoder includes one 9-bit
analog-to-digital converter (ADC) with 2× sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from
the 14.31818-MHz crystal or oscillator input) and is line locked. The output formats can be 8-bit 4:2:2 or
8-bit ITU-R BT.656 with embedded synchronization.
The TVP5150AM1 decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or
unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream
video encoders.
Complementary four-line adaptive comb filtering is available for both the luminance and chrominance data
paths to reduce both cross-luminance and cross-chrominance artifacts; a chrominance trap filter is also
available.
Video characteristics including hue, brightness, saturation, and sharpness may be programmed using the
industry standard I
2
C serial interface. The TVP5150AM1 decoder generates synchronization, blanking,
lock, and clock signals in addition to digital video outputs. The TVP5150AM1 decoder includes methods
for advanced vertical blanking interval (VBI) data retrieval. The VBI data processor slices, parses, and
performs error checking on teletext, closed caption, and other data in several formats.
The TVP5150AM1 decoder detects copy-protected input signals according to the Macrovision™ standard
and detects Type 1, 2, 3, and colorstripe processes.
The main blocks of the TVP5150AM1 decoder include:
•
Robust sync detector
•
ADC with analog processor
•
Y/C separation using four-line adaptive comb filter
•
Chrominance processor
•
Luminance processor
•
Video clock/timing processor and power-down control
•
Output formatter
•
I
2
C interface
•
VBI data processor
•
Macrovision detection for composite and S-video
2
Introduction
www.ti.com:
Copyright
©
2007–2011, Texas Instruments Incorporated