TMS320F28335, TMS320F28334, TMS320F28332
TMS320F28235, TMS320F28234, TMS320F28232
SPRS439I–JUNE 2007–REVISED MARCH 2011
www.ti.com
6.15.4 Simultaneous Sampling Mode (Dual-Channel) (SMODE = 1)
In simultaneous mode, the ADC can continuously convert input signals on any one pair of channels
(A0/B0 to A7/B7). The ADC can start conversions on event triggers from the ePWM, software trigger, or
from an external ADCSOC signal. If the SMODE bit is 1, the ADC will do conversions on two selected
channels on every Sample/Hold pulse. The conversion time and latency of the result register update are
explained below. The ADC interrupt flags are set a few SYSCLKOUT cycles after the Result register
update. The selected channels will be sampled simultaneously at the falling edge of the Sample/Hold
pulse. The Sample/Hold pulse width can be programmed to be 1 ADC clock wide (minimum) or 16 ADC
clocks wide (maximum).
NOTE
In simultaneous mode, the ADCIN channel pair select has to be A0/B0, A1/B1, ..., A7/B7,
and not in other combinations (such as A1/B3, etc.).
Sample n
Sample n+2
Sample n+1
Analog Input on
Channel Ax
Analog Input on
Channel Bx
ADC Clock
Sample and Hold
SH Pulse
SMODE Bit
t
d(SH)
t
dschA0_n+1
t
SH
ADC Event Trigger from
ePWM or Other Sources
t
t
dschA0_n
dschB0_n+1
t
dschB0_n
Figure 6-34. Simultaneous Sampling Mode Timing
Table 6-54. Simultaneous Sampling Mode Timing
AT 25-MHz
ADC CLOCK,
tc(ADCCLK) = 40 ns
SAMPLE n
SAMPLE n + 1
REMARKS
td(SH)
Delay time from event trigger to
2.5tc(ADCCLK)
sampling
tSH
Sample/Hold width/Acquisition
Width
(1 + Acqps) *
tc(ADCCLK)
40 ns with Acqps = 0 Acqps value = 0-15
ADCTRL1[8:11]
td(schA0_n)
td(schB0_n )
Delay time for first result to
appear in Result register
4tc(ADCCLK)
160 ns
200 ns
120 ns
120 ns
Delay time for first result to
appear in Result register
5tc(ADCCLK)
td(schA0_n+1) Delay time for successive results
to appear in Result register
(3 + Acqps) * tc(ADCCLK)
(3 + Acqps) * tc(ADCCLK)
td(schB0_n+1 ) Delay time for successive results
to appear in Result register
172
Electrical Specifications
Copyright © 2007–2011, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TMS320F28335 TMS320F28334 TMS320F28332 TMS320F28235 TMS320F28234
TMS320F28232
TI [ TEXAS INSTRUMENTS ]
