TMS320F2809, TMS320F2808, TMS320F2806
TMS320F2802, TMS320F2801, UCD9501
TMS320C2802, TMS320C2801, and TMS320F2801x DSPs
www.ti.com
SPRS230H–OCTOBER 2003–REVISED JUNE 2006
6
Electrical Specifications
This section provides the absolute maximum ratings and the recommended operating conditions for the
TMS320F280x DSPs.
NOTE
Information/data on TMS320F2809 is PRODUCT PREVIEW.
PRODUCT PREVIEW information concerns products in the formative or design phase of
development. Characteristic data and other specifications are design goals. Texas
Instruments reserves the right to change or discontinue these products without notice.
6.1 Absolute Maximum Ratings(1)(2)
Unless otherwise noted, the list of absolute maximum ratings are specified over operating temperature ranges.
Supply voltage range, VDDIO, VDD3VFL
Supply voltage range, VDDA2, VDDAIO
Supply voltage range, VDD
with respect to VSS
with respect to VSSA
with respect to VSS
with respect to VSSA
with respect to VSS
- 0.3 V to 4.6 V
- 0.3 V to 4.6 V
- 0.3 V to 2.5 V
- 0.3 V to 2.5 V
- 0.3 V to 0.3 V
- 0.3 V to 4.6 V
- 0.3 V to 4.6 V
± 20 mA
Supply voltage range, VDD1A18, VDD2A18
Supply voltage range, VSSA2, VSSAIO, VSS1AGND, VSS2AGND
Input voltage range, VIN
Output voltage range, VO
(3)
Input clamp current, IIK (VIN < 0 or VIN > VDDIO
)
Output clamp current, IOK (VO < 0 or VO > VDDIO
Operating ambient temperature ranges,
)
± 20 mA
TA: A version (GGM, PZ)(4)
TA: S version (GGM, PZ)(4)
TA: Q version ( PZ)(4)
- 40°C to 85°C
- 40°C to 125°C
- 40°C to 125°C
- 40°C to 150°C
- 65°C to 150°C
Junction temperature range, Tj(4)
(4)
Storage temperature range, Tstg
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Section 6.2 is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to VSS, unless otherwise noted.
(3) Continuous clamp current per pin is ± 2 mA. This includes the analog inputs which have an internal clamping circuit that clamps the
voltage to a diode drop above VDDA2 or below VSSA2
.
(4) Long-term high-temperature storage and/or extended use at maximum temperature conditions may result in a reduction of overall device
life. For additional information, see IC Package Thermal Metrics Application Report (literature number SPRA953) and Reliability Data for
TMS320LF24x and TMS320F281x Devices Application Report (literature number SPRA963)
Electrical Specifications
87
TI [ TEXAS INSTRUMENTS ]
