THS4511
www.ti.com
SLOS471–SEPTEMBER 2005
WIDEBAND, LOW NOISE, LOW DISTORTION FULLY DIFFERENTIAL AMPLIFIER
FEATURES
DESCRIPTION
•
Fully Differential Architecture
The THS4511 is a wideband, fully-differential oper-
ational amplifier designed for single-supply 5-V
data-acquisition systems. It has very low noise at 2
nV/√Hz, and extremely low harmonic distortion of –72
dBc HD2 and –87 dBc HD3 at 70 MHz with 2 Vpp,
G = 0 dB, and 200-Ω load. Slew rate is very high at
4900 Vµs and with settling time of 3.3 ns to 0.1% (2
V step) it is ideal for pulsed applications. It is
designed for minimum gain of 0 dB.
•
Common-Mode Input Range Includes
the Negative Rail
•
•
•
•
•
•
•
•
•
•
•
•
•
Unity Gain Stable
Bandwidth: 1.6 GHz (Gain = 0 dB)
Slew Rate: 4900 V/µs
0.1% Settling Time: 3.3 ns
HD2: –72 dBc at 70 MHz
To allow for dc coupling to ADCs, its unique output
common-mode control circuit maintains the output
common-mode voltage within 5-mV offset (typical)
from the set voltage, when set within ±0.5 V of
mid-supply. The common-mode set point is set to
mid-supply by internal circuitry, which may be
over-driven from an external source.
HD3: –87 dBc at 70 MHz
OIP2: 76 dBm at 70 MHz
OIP3: 42 dBm at 70 MHz
Input Voltage Noise: 2 nV/√Hz (f > 10 MHz)
Noise Figure: 21.8 dB (50 Ω System, G = 6 dB)
Output Common-Mode Control
5-V Power Supply Current: 39.2 mA
Power-Down Capability: 0.65 mA
The THS4511 is a high-performance amplifier that
has been optimized for use in 5-V single supply data
acquisition systems. The output has been optimized
for best performance with its common-mode voltages
set to mid supply, and the input has been optimized
for performance over a wide range of common-mode
APPLICATIONS
•
•
•
•
•
5-V Data-Acquisition Systems
High Linearity ADC Amplifier
Wireless Communication
Medical Imaging
input voltages. High performance at
a
low
power-supply voltage enables single-supply 5-V
data-acquisition systems while minimizing component
count.
Test and Measurement
The THS4511 is offered in a Quad 16-pin leadless
QFN package (RGT), and is characterized for oper-
ation over the full industrial temperature range from
–40°C to 85°C.
RELATED PRODUCTS
Device
Min. Gain Common Mode Range
of Input*
Video Buffer, Single-Ended to Differential
THS4508
THS4509
THS4511
THS4513
6 dB
6 dB
0 dB
0 dB
–0.3V to 2.3V
0.75V to 4.25V
–0.3V to 2.3V
0.75V to 4.25V
Video Source
R
= 75 W
V
175 W
348 W
S
IN
V
= 5 V
S+
130 W
V
Signal
*Note: Assumes a 5V single-ended power supply
R
O
-
V
THS4511
R
OD
175 W
O
+
V
= 2.5 V
CM
V
75 W
130 W
S-
348 W
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TI [ TEXAS INSTRUMENTS ]
