MSP430F673x
MSP430F672x
www.ti.com
SLAS731A –DECEMBER 2011–REVISED APRIL 2012
MIXED SIGNAL MICROCONTROLLER
1
FEATURES
2
•
Low Supply Voltage Range: 1.8 V to 3.6 V
•
•
Three 16-Bit Timers With Two
Capture/Compare Registers Each
•
Ultra-Low Power Consumption
Enhanced Universal Serial Communication
Interfaces
–
Active Mode (AM):
All System Clocks Active
265 µA/MHz at 8 MHz, 3.0 V, Flash Program
Execution (Typical)
–
eUSCI_A0, eUSCI_A1, and eUSCI_A2 Each
Support:
140 µA/MHz at 8 MHz, 3.0 V, RAM Program
Execution (Typical)
–
Enhanced UART Supporting Auto-
Baudrate Detection
–
Standby Mode (LPM3):
–
–
IrDA Encoder and Decoder
Synchronous SPI
Real-Time Clock With Crystal, Watchdog,
and Supply Supervisor Operational, Full
RAM Retention, Fast Wake-Up:
–
eUSCI_B0 Supports:
–
–
I2C With Multi-Slave Addressing
1.7 µA at 2.2 V, 2.5 µA at 3.0 V (Typical)
Synchronous SPI
–
–
–
Off Mode (LPM4):
Full RAM Retention, Supply Supervisor
Operational, Fast Wake-Up:
1.6 µA at 3.0 V (Typical)
•
•
Password-Protected Real-Time Clock With
Crystal Offset Calibration and Temperature
Compensation
Shutdown RTC Mode (LPM3.5):
Shutdown mode, Active Real Time Clock
with Crystal:
Separate Voltage Supply for Backup
Subsystem
–
–
–
32-kHz Low-Frequency Oscillator (XT1)
Real-Time Clock
1.24 µA at 3.0 V (Typical)
Shutdown Mode (LPM4.5):
0.78 µA at 3.0 V (Typical)
Backup Memory (4 x 16 Bits)
•
•
•
•
Three 24-Bit Sigma-Delta Analog-to-Digital
(A/D) Converters With Differential PGA Inputs
•
•
Wake-Up From Standby Mode in 3 µs (Typical)
16-Bit RISC Architecture, Extended Memory,
up to 25-MHz System Clock
Integrated LCD Driver With Contrast Control
for up to 320 Segments in 8-Mux Mode
•
Flexible Power Management System
Hardware Multiplier Supports 32-Bit
Operations
–
–
–
Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
10-Bit 200-ksps A/D Converter
Supply Voltage Supervision, Monitoring,
and Brownout
–
–
–
Internal Reference
Sample-and-Hold, Autoscan Feature
System Operation From up to Two Auxiliary
Power Supplies
Up to Six External Channels, Two Internal
Channels, Including Temperature Sensor
•
Unified Clock System
•
•
Three-Channel Internal DMA
–
–
–
–
FLL Control Loop for Frequency
Stabilization
Serial Onboard Programming, No External
Programming Voltage Needed
Low-Power Low-Frequency Internal Clock
Source (VLO)
•
•
Family Members are Summarized in Table 1
Available in 100-Pin and 80-Pin LQFP
Packages
Low-Frequency Trimmed Internal Reference
Source (REFO)
•
For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User's
Guide (SLAU208)
32-kHz Crystals (XT1)
•
One 16-Bit Timer With Three Capture/Compare
Registers
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
I2C is a trademark of others.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2012, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
