SNAS558J – FEBRUARY 2000 – REVISED MARCH 2013
FREQUENCY DIVIDER
The monostable circuit of
can be used as a frequency divider by adjusting the length of the timing cycle.
shows the waveforms generated in a divide by three circuit.
V
CC
= 5V
Top Trace: Input 4 V/Div.
TIME = 20 µs/Div. Middle Trace: Output 2 V/Div.
R
A
= 9.1 kΩ
Bottom Trace: Capacitor 2 V/Div.
C = 0.01 µF
Figure 11. Frequency Divider Waveforms
PULSE WIDTH MODULATOR
When the timer is connected in the monostable mode and triggered with a continuous pulse train, the output
pulse width can be modulated by a signal applied to the Control Voltage Terminal.
shows the circuit,
and in
are some waveform examples.
Figure 12. Pulse Width Modulator
V
CC
= 5V
Top Trace: Modulation 1 V/Div.
TIME = 0.2 ms/Div. Bottom Trace: Output Voltage 2 V/Div.
R
A
= 9.1 kΩ
C = 0.01 µF
Figure 13. Pulse Width Modulator Waveforms
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links:
9
TI [ TEXAS INSTRUMENTS ]
