SNOS641F – OCTOBER 1999 – REVISED JULY 2013
-
N/C*
1
2
5
N/C
N/C
1
2
-
5
FB
3
+
4
N/C
+
3
ADJ
4
N/C
*This pin must be left floating or connected to pin 1.
Figure 2. SC70 - Top View
See Package Number DCK0005A
Figure 3. TO-92
Bottom View
See Package Number LP0003A
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1) (2)
Reverse Current
Forward Current
Maximum Output Voltage (LM4041-N ADJ, LM4041-N-Q1 ADJ)
Power Dissipation (T
A
= 25°C)
(3)
DBZ Package
LP Package
DCK Package
Storage Temperature
Lead Temperature
DBZ Packages
LP Package
ESD Susceptibility
Vapor phase (60 seconds)
Infrared (15 seconds)
Soldering (10 seconds)
Human Body Model
(4)
Machine Model
(4)
20 mA
10 mA
15V
306 mW
550 mW
241mW
−65°C
to +150°C
+215°C
+220°C
+260°C
2 kV
200V
See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices
(1)
Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is functional, but do not ensure specific performance limits. For ensured specifications and test conditions, see the
Electrical Characteristics. The ensured specifications apply only for the test conditions listed. Some performance characteristics may
degrade when the device is not operated under the listed test conditions.
If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
The maximum power dissipation must be derated at elevated temperatures and is dictated by T
Jmax
(maximum junction temperature),
θ
JA
(junction to ambient thermal resistance), and T
A
(ambient temperature). The maximum allowable power dissipation at any
temperature is PD
max
= (T
Jmax
−
T
A
)/θ
JA
or the number given in the Absolute Maximum Ratings, whichever is lower. For the LM4041-N,
T
Jmax
= 125°C, and the typical thermal resistance (θ
JA
), when board mounted, is 326°C/W for the SOT-23 package, 415°C/W for the
SC70 package and 180°C/W with 0.4″ lead length and 170°C/W with 0.125″ lead length for the TO-92 package.
The human body model is a 100 pF capacitor discharged through a 1.5 kΩ resistor into each pin. The machine model is a 200 pF
capacitor discharged directly into each pin. All pins are rated at 2kV for Human Body Model, but the feedback pin which is rated at 1kV.
(2)
(3)
(4)
2
Copyright © 1999–2013, Texas Instruments Incorporated
Product Folder Links:
TI [ TEXAS INSTRUMENTS ]
