LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V
DUAL OPERATIONAL AMPLIFIERS
SLOS068R − JUNE 1976 − REVISED JULY 2010
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
LM158, LM158A
LM258, LM258A
LM358, LM358A
LM2904V
LM2904
UNIT
Supply voltage, V (see Note 1)
16 or 32
32
13 or 26
26
V
V
V
CC
Differential input voltage, V (see Note 2)
ID
Input voltage, V (either input)
−0.3 to 32
−0.3 to 26
I
Duration of output short circuit (one amplifier) to ground
Unlimited
Unlimited
at (or below) 25°C free-air temperature (V ≤ 15 V) (see Note 3)
CC
D package
97
172
97
172
85
DGK package
P package
85
Package thermal impedance, q (see Notes 4 and 5)
°C/W
JA
PS package
PW package
FK package
JG package
LM158, LM158A
LM258, LM258A
LM358, LM358A
LM2904
95
95
149
149
5.61
Package thermal impedance, q (see Notes 6 and 7)
°C/W
°C
JC
14.5
−55 to 125
−25 to 85
0 to 70
−40 to 125
150
Operating free-air temperature range, T
A
−40 to 125
150
Operating virtual junction temperature, T
°C
°C
°C
°C
J
Case temperature for 60 seconds
FK package
JG package
260
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds
300
300
Storage temperature range, T
−65 to 150
−65 to 150
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages and V specified for measurement of I , are with respect to the network ground
CC
OS
terminal.
2. Differential voltages are at IN+ with respect to IN−.
3. Short circuits from outputs to V can cause excessive heating and eventual destruction.
CC
4. Maximum power dissipation is a function of T (max), q , and T . The maximum allowable power dissipation at any allowable
J
JA
A
ambient temperature is P = (T (max) − T )/q . Operating at the absolute maximum T of 150°C can affect reliability.
D
J
A
JA
J
5. The package thermal impedance is calculated in accordance with JESD 51-7.
6. Maximum power dissipation is a function of T (max), q , and T . The maximum allowable power dissipation at any allowable case
J
JC
C
temperature is P = (T (max) − T )/q . Operating at the absolute maximum T of 150°C can affect reliability.
D
J
C
JC
J
7. The package thermal impedance is calculated in accordance with MIL-STD-883.
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TI [ TEXAS INSTRUMENTS ]
