SNLS011C – JULY 1999 – REVISED APRIL 2013
DS90LV032A 3V LVDS Quad CMOS Differential Line Receiver
Check for Samples:
1
FEATURES
>400 Mbps (200 MHz) switching rates
0.1 ns channel-to-channel skew (typical)
0.1 ns differential skew (typical)
3.3 ns maximum propagation delay
3.3V power supply design
Power down high impedance on LVDS inputs
Low Power design (40mW @ 3.3V static)
Interoperable with existing 5V LVDS networks
Accepts small swing (350 mV typical) VID
Supports open, short and terminated input fail-
safe
Compatible with ANSI/TIA/EIA-644
Industrial temp. operating range (-40°C to
+85°C)
Available in SOIC and TSSOP Packaging
DESCRIPTION
The DS90LV032A is a quad CMOS differential line
receiver designed for applications requiring ultra low
power dissipation and high data rates. The device is
designed to support data rates in excess of 400 Mbps
(200 MHz) utilizing Low Voltage Differential Signaling
(LVDS) technology.
The DS90LV032A accepts low voltage (350 mV
typical) differential input signals and translates them
to 3V CMOS output levels. The receiver supports a
TRI-STATE
®
function that may be used to multiplex
outputs. The receiver also supports open, shorted
and terminated (100Ω) input Fail-safe. The receiver
output will be HIGH for all fail-safe conditions.
The DS90LV032A and companion LVDS line driver
(eg. DS90LV031A) provide a new alternative to high
power PECL/ECL devices for high speed point-to-
point interface applications.
•
•
•
•
•
•
•
•
•
•
23
•
•
•
Connection Diagram
Order Number DS90LV032ATM
or DS90LV032ATMTC
D-16 and PW-16 Packages
1
2
3
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TRI-STATE is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
Copyright © 1999–2013, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TI [ TEXAS INSTRUMENTS ]
