SNAS534B – MAY 1999 – REVISED MARCH 2013
DAC0830/DAC0832 8-Bit
μP
Compatible, Double-Buffered D to A Converters
Check for Samples:
1
FEATURES
KEY SPECIFICATIONS
•
•
•
•
•
•
Current Settling Time: 1
μs
Resolution: 8 bits
Linearity: 8, 9, or 10 bits (Ensured Over
Temp.)
Gain Tempco: 0.0002% FS/°C
Low Power Dissipation: 20 mW
Single Power Supply: 5 to 15 V
DC
• Double-Buffered, Single-Buffered or Flow-
Through Digital Data Inputs
• Easy Interchange and Pin-Compatible with 12-
bit DAC1230 Series
• Direct Interface to All Popular
Microprocessors
• Linearity Specified with Zero and Full Scale
Adjust Only—NOT BEST STRAIGHT LINE FIT.
• Works with ±10V Reference-Full 4-Quadrant
Multiplication
• Can Be Used in the Voltage Switching Mode
• Logic Inputs Which Meet TTL Voltage Level
Specs (1.4V Logic Threshold)
• Operates “STAND ALONE” (without
μP)
if
Desired
• Available in 20-Pin SOIC or PLCC Package
234
DESCRIPTION
The DAC0830 is an advanced CMOS/Si-Cr 8-bit
multiplying DAC designed to interface directly with the
8080, 8048, 8085, Z80
®
, and other popular
microprocessors. A deposited silicon-chromium R-2R
resistor ladder network divides the reference current
and provides the circuit with excellent temperature
tracking characteristics (0.05% of Full Scale Range
maximum linearity error over temperature). The circuit
uses CMOS current switches and control logic to
achieve low power consumption and low output
leakage current errors. Special circuitry provides TTL
logic input voltage level compatibility.
Double buffering allows these DACs to output a
voltage corresponding to one digital word while
holding the next digital word. This permits the
simultaneous updating of any number of DACs.
The DAC0830 series are the 8-bit members of a
family of microprocessor-compatible DACs (MICRO-
DAC).
Typical Application
1
2
3
4
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
BI-FET is a trademark of Texas Instruments.
Z80 is a registered trademark of Zilog Corporation.
All other trademarks are the property of their respective owners.
Copyright © 1999–2013, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
TI [ TEXAS INSTRUMENTS ]
