ADS1248EVM-PDK Kit Operation
www.ti.com
Switch the BSL switch (SW4) on the MMB3 to the BSL position (to the left) as instructed, then press
OK. The plug-in will download the firmware to the MMB3. This operation may take a couple of minutes,
so the progress is updated in the message at the top of the ADS1248 plug-in window (as Figure 13
shows). The firmware is saved in flash memory on the MMB3, so this operation should only need to be
performed once.
Figure 13. Firmware Download Progress Indicator
16
ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK
SBAU142B–April 2009–Revised May 2011
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
