www.ti.com
ADS1248EVM-PDK Kit Operation
break
Step 4. If the plug-in cannot connect to the EVM, you will see a window as shown in Figure 11. This
message may indicate that the firmware is not loaded on the MMB3. You may select Retry
Auto Connect; if that action fails, select Retry Manual Connect and specify the COM port to
be used.
Figure 11. Connection Timeout
Step 5. The plug-in detects whether or not the board has the correct firmware loaded. The first time
you use the ADS1248EVM-PDK, the firmware for the MMB3 may need to be downloaded to
the MMB3. If the firmware needs to be loaded, you will see a screen as shown in Figure 12.
Figure 12. Firmware Download Message Box
15
SBAU142B–April 2009–Revised May 2011
ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK
Submit Documentation Feedback
Copyright © 2009–2011, Texas Instruments Incorporated
TI [ TEXAS INSTRUMENTS ]
