ADS1248EVM-PDK Kit Operation
8.2
Setting Up the ADS1248EVM-PDK
The ADS1248EVM-PDK contains both the ADS1248EVM and the MMB3 motherboard; however, the
devices are shipped unconnected. Follow these steps to set up the ADS1248EVM-PDK.
Step 1. Unpack the ADS1248EVM-PDK kit.
Step 2. Set the switches on the MMB3 as described below, as shown in
•
Set switch SW4 to the right.
•
Set the DAC switch (SW5) to the OUT position (to the right).
Figure 6. MMB3 Switch Locations
Step 3.
Plug the ADS1248EVM into the MMB3 as
illustrates.
10
ADS1148EVM, ADS1248EVM, ADS1148EVM-PDK, and ADS1248EVM-PDK
Copyright
©
2009–2011, Texas Instruments Incorporated
SBAU142B
–
April 2009
–
Revised May 2011