Data Sheet 71M6531D/F-71M6532D/F
FDS 6531/6532 005
5.7.3 Recommended PCB Land Pattern for the QFN-68 Package
Figure 49: PCB Land Pattern for QFN 68 Package
Table 89: Recommended PCB Land Pattern Dimensions
Symbol
Description
Lead pitch
Typical Dimension
0.4mm
e
x
Pad width
0.23mm
y
Pad length, see note 3
See note 1
0.8mm
d
6.3mm
A
G
6.63mm
7.2mm
Notes:
1. Do not place unmasked vias in the region denoted by dimension d.
2. Soldering of bottom internal pad is not required for proper operation.
3. The y dimension has been elongated to allow for hand soldering and reworking. Production assembly
may allow this dimension to be reduced as long as the G dimension is maintained.
110
© 2005-2010 TERIDIAN Semiconductor Corporation
v1.3
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
