71M6513/71M6513H
3-Phase Energy Meter IC
A Maxim Integrated Products Brand
DATA SHEET
SEPTEMBER 2011
Flash Programming
Operational or test code can be programmed into the flash memory using either an in-circuit emulator or the Flash Download
Board Module (FDBM) available from Teridian. The flash programming procedure uses the E_RTS, E_RXTX, and E_TCLK
pins.
MPU Firmware Library
All application-specific MPU functions mentioned above under “Application Information” are available from Teridian as a
standard ANSI C library and as ANSI “C” source code. The code is available as part of the Demonstration Kit for the 71M6513
and 71M6513H ICs. The Demonstration Kits come with the 71M6513 or 71M6513H IC preprogrammed with demo firmware
mounted on a functional sample meter PCB (Demo Board). The Demo Boards allow for quick and efficient evaluation of the IC
without having to write firmware or having to supply an in-circuit emulator (ICE).
A reference guide for firmware development on the 71M6513 and 71M6513H is available as a separate document (Software
User’s Guide, “SUG”). The User’s Manuals supplied with the Demo Kits contain MPU address maps for the demo code as well
as other useful information, such as sample calibration procedures.
© 2005-2011 Teridian Semiconductor Corporation
Page: 89 of 104
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
