STANDARD MICROCIRCUIT DRAWING BULLETIN
DATE: 01-01-30
Approved sources of supply for SMD 5962-89536 are listed below for immediate acquisition information only and
shall be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 will be
revised to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a
certificate of compliance has been submitted to and accepted by DSCC-VA. This bulletin is superseded by the next
dated revision of MIL-HDBK-103 and QML-38535.
Standard microcircuit 1/
drawing PIN
Vendor
CAGE number
Vendor
similar PIN 2/
5962-8953601XA
5962-8953601YA
5962-8953601ZA
61772 4/
3/
IDT7203L120DB
IDT7203L120XEB
IDT7203L120LB
61772 4/
5962-8953602XA
5962-8953602YA
5962-8953602ZA
61772 4/
3/
IDT7203L80DB
IDT7203L80XEB
IDT7203L80LB
61772 4/
5962-8953603XA
5962-8953603YA
5962-8953603ZA
61772 4/
3/
IDT7203L65DB
IDT7203L65XEB
IDT7203L65LB
61772 4/
5962-8953604XA
5962-8953604YA
5962-8953604ZA
61772 4/
3/
IDT7203L50DB
IDT7203L50XEB
IDT7203L50LB
61772 4/
5962-8953605XA
5962-8953605YA
5962-8953605ZA
61772
3/
IDT7203L40DB
IDT7203L40XEB
IDT7203L40LB
61772
1/ The lead finish shown for each PIN representing a hermetic package is the most
readily available from the manufacturer listed for that part. If the desired lead finish
is not listed contact the Vendor to determine its availability.
2/ Caution. Do not use this number for item acquisition. Items acquired to this
number may not satisfy the performance requirements of this drawing.
3/ No longer available from an approved source.
4/ Vendor has announced an end of life date of 10/29/2001 for these devices.
Vendor CAGE
number
Vendor name
and address
61772
Integrated Device Technology, Incorporated
2975 Stender Way
Santa Clara, CA 95054
The information contained herein is disseminated for convenience only and the
Government assumes no liability whatsoever for any inaccuracies in the
information bulletin.