C2510Fx / CC2511Fx
Parameter
Min
Typ
Max
Unit
Condition
System clock running at 24 MHz.
Active mode with
radio in RX
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in RX mode (sensitivity optimized
MDMCFG2.DEM_DCFILT_OFF=0)
20.6
22.1
22.7
20.8
mA
mA
mA
mA
2.4 kBaud, input at sensitivity limit
10 kBaud, input at sensitivity limit
250 kBaud, input at sensitivity limit
500 kBaud, input at sensitivity limit
System clock running at 26 MHz.
Active mode with
radio in TX
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode
26
mA
0 dBm output power (PA_TABLE0=0xFE). See Table 7 for typical
variation over operating conditions
18.5
15.5
26
mA
mA
mA
-6 dBm output power (PA_TABLE0=0x7F)
-12 dBm output power (PA_TABLE0=0x95)
System clock running at 24 MHz.
Digital regulator on. High speed crystal oscillator and low power
RCOSC running. Radio in TX mode w/0 dBm output power
(PA_TABLE0=0xFE)
PM0
PM1
4.3
mA
Same as active mode, but the CPU is not running (see 13.1.2.2 for
details). System clock running at 26 MHz
220
Digital regulator on. HS RCOSC and high speed crystal oscillator off.
32.768 kHz XOSC or low power RCOSC running (see 13.1.2.3 for
details)
µA
PM2
PM3
0.5
0.3
1
1
Digital regulator off. HS RCOSC and high speed crystal oscillator off.
Low power RCOSC running (see 13.1.2.4 for details)
µA
µA
Digital regulator off. No crystal oscillators or RC oscillators are
running (see 13.1.2.5 for details)
Peripheral
Current
Add to the figures above if the peripheral unit is activated
Consumption
Timer 1
Timer 2
Timer 3
Timer 4
ADC
2.7
1.3
1.6
2
When running
When running
When running
When running
During conversion
µA/MHz
µA/MHz
µA/MHz
µA/MHz
mA
1.2
Table 6: Current Consumption
SWRS055D
Page 11 of 243
TAOS [ TEXAS ADVANCED OPTOELECTRONIC SOLUTIONS ]
