■ RELIABILITY DATA
12.Adhesion of terminal electrode
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
No abnormality.
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520ꢀApplied force:10N to X and Y directions
Duration:5 sec.
Test substrate:Printed board
LB1608・CBMF1608・LBMF1608
Applied force:5N to X and Y directions
Duration:5 sec.
Test substrate:Printed board
13.Resistance to vibration
LEM2520
Inductance change:Within±5%
No significant abnormality in appearance.
No significant abnormality in appearance.
No significant abnormality in appearance.
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
Inductance change:Within±10%
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
Inductance change:Within±5%
【Test Methods and Remarks】
LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF:According to JIS C5102 clause 8.2.
Vibration type:A
Directions:2 hrs each in X, Y and Z directions. Total:6 hrs
Frequency range:10 to 55 to 10 Hz(1min.)
Amplitude:1.5mm
Mounting method:Soldering onto printed board
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
14.Drop test
LEM2520
LB3218
Inductance change:Within±5%
No significant abnormality in appearance.
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM:
Acceleration:980m/sec2
Duration:6msec
Number of times:6 sides×3 times
Mounting method:Soldering onto printed board
Recovery:At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.
LEM:Recovery
At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.
15.Solderability
LEM2520
LB3218
LB2518
LB2016
LB2012
LB1608
LBMF1608
LBC3225
LBR2518
CB2518
LBC2518
LBR2012
CB2016
CBC2518
LBC2016
LBC2012
CB2012
At least 90% of surface of terminal electrode is covered by new
CBC3225
CBL2012
CBMF1608
LBM2016
CBC2016
CBC2012
【Test Methods and Remarks】
LEM:
Solder temperature:230±5℃
Duration:5±0.5sec.
Flux:Methanol solution with 25% of colophony
LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF: Solder temperature:245±5℃
Duration:5±0.5sec
Flux:Methanol solution with 25% of colophony
*This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0103_reli_e-01
wound0103_reli-PRP4