■ RELIABILITY DATA
Multilayer Ceramic Capacitors and Medium-High Voltage Multilayer Ceramic
Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors（CFCAP）
1. Operating Temperature Range
Specified Value
－55 to ＋125℃
2. Storage Temperature Range
Specified Value
－55 to ＋125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
No breakdown or damage
4. Dielectric Withstanding Voltage（Between terminals）
Specified Value
【Test Methods and Remarks】
Applied voltage: Rated voltage×3
Duration: 1 to 5 sec.
Charge/discharge current: 50mA max.
５．Insulation Resistance
Specified Value
10000 MΩ or 500MΩμF, whichever is smaller
【Test Methods and Remarks】
Applied voltage: Rated voltage
Duration: 60±5 sec.
Charge/discharge current: 50mA max.
6．Capacitance（Tolerance）
Specified Value
±10％
【Test Methods and Remarks】
Measuring frequency：1ｋHz±10%
Measuring voltage：1±0.2Vrms
Bias application: None
７．Dissipation Factor
Specified Value
0.1%max
【Test Methods and Remarks】
Measuring frequency：1ｋHz±10%
Measuring voltage：1±0.2Vrms
Bias application: None
8．Bending Strength
Appearance: No abnormality
Capacitance change: ±5%
Specified Value
【Test Methods and Remarks】
Warp: 1mm
Speed: 0.5mm/second
Duration:10 seconds
R-230
Test board: glass epoxy resin substrate
Thickness: 1.6mm
Capacitance measurement shall be conducted with the board bent.
ꢀ
9．Adhesive Force of Terminal Electrodes
Specified Value
Terminal electrodes shall be no exfoliation or a sign of exfoliation.
【Test Methods and Remarks】
Applied force: 5N
Duration: 30 ±5 seconds
10．Solderability
Specified Value
At least 95% of terminal electrode is covered by new solder.
【Test Methods and Remarks】
Solder type
H60A or H63A
Solder temperature
Duration
Eutectic solder
230±5℃
245±3℃
4±1 sec.
Lead-free solder Snー3.0Agー0.5Cu
11．Resistance to Soldering Heat
Appearance: No abnormality
Capacitance change: ±2.5% max.
Dissipation factor : Initial value
Specified Value
Insulation resistance: Initial value
Withstanding voltage（between terminals）: No abnormality
【Test Methods and Remarks】
Solder temp.: 270 ±5℃
Duration: 3 ±0.5 sec.
Preheating conditions：80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
Measurement shall be conducted : 24±2hrs under the standard condition
Note1
＊This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc05_reli_e-01
mlcc05_reli-R1
TAIYO YUDEN [ TAIYO YUDEN (U.S.A.), INC ]
